To match the settings in one Grundfos CUE VFDto a matching unit, the Local Control Panel screen must be used to copy and transfer the data. Below is the instructions:

Go to settings and the 0-5.

Under 0-Operation / Display

Select 0-0 Basic settings and then press OK button.

Push right arrow key over until you see LCP Copy.

Should be 0-50

Copy All to LCP

Remove the Local Control Panel (LCP) from CUE

Place it in the CUE to be programmed.

Go to settings and the 0-5.

Under 0-Operation / Display

Select0-0 Basic settings and then press OK button.

Push right arrow key over until you see LCP Copy.

Should be 0-50

Copy From LCP

For additional technical support, contact a Grundfos Applications Engineer at 1-844-994-2850.